We're here to help

    IP camera Lumens HD PTZ VC-A20P


    The VC-A20P camera is an unique PTZ camera providing multiple high quality outputs at the same time. Besides IP you can also grab video from the DVI and Composite at the same time. The camera can be controlled via Visca (Sony compatible) and OnVif at the same time.

    To retrieve the IP output, first find the DHCP ip-address via the camera remote control menu. Then enter the following address in the Presentations 2Go video source menu to get the highest quality:


    IP Camera

    Manufacturer information

    Key Features

    • Full HD 1080p high definition signal output format with a high frame rate of 60 fps
    • 10x optical zoom
    • Ethernet, DVI-I, and C-Video image outputs synchronously
    • Maximum horizontal/vertical speed of rotation: 120 degrees/second
    • Horizontal viewing angle: 56.5°
    • Audio Input Support
    • Built-in image flip and mirror functions
    • Up to 128 user-defined preset modes to allow for ease of use in all environments




    1/2.8” 2MP CMOS

    Video Output

    1080p 60 / 59.94 / 50 / 30 / 29.97 fps,
    1080i 50 / 60 fps, 720p 60 / 50 fps,
    NTSC / PAL

    Optical Zoom


    Panning Angle

    -170° ~ +170°

    Tilting Angle

    -30° ~ +90°

    Preset Positions


    Video Output(HD) Interface

    DVI-I, Ethernet

    Video Output(SD) Interface

    CVBS (C-Video)

    Network Interface

    ONVIF / RTSP Streaming / RTMP Streaming

    Camera Control Interface/Protocol

    RS-232 / RS-422 / Ethernet

    Video S/N Ratio

    > 50dB

    Shutter Speed

    1/1 ~ 1/10,000 sec

    Focal Length

    f = 5 ~ 50 mm

    Horizontal Viewing Angle



    F1.8 ~ 3.0

    Minimum Illumination

    5 lux

    Minimum Object Distance

    100(Wide) ~ 1000(Tele) mm

    Gain Control

    Auto, Manual

    White Balance

    Auto, Indoor, Outdoor, One-Push, Manual

    Exposure Control

    Auto, Manual

    Focus System

    Auto, Manual

    Image Flip



    4.0 lbs (1.8 Kg)

    Dimension: (LxWxH)

    174x173.8x182.7 mm (6.9" x 6.8" x 7.2")


    • Since firmware 107 the Onvif protocol has been updated. Encoder version 4.0.5596 and lower cannot handle this new protocol yet.
    • Mjpeg is not working well with Presentations 2Go before firmware release 115
    • h264 resolution is not stable in 720P mode. The encoder will detect it as 1080P sometimes. 
    • h264 mode sometimes shows partial frozen areas, especially in 1080p and 720p.







    Was this article helpful?
    0 out of 0 found this helpful